RAPIDPRESS RUNDOWN
RapidPress Bends vs Elbows
In our RapidPress bends range we have both Female-Female bends and Male-Female bends available in both 90 degree and 45 degree configurations.
We stock these in sizes from 15 – 108mm. Our standard bends are fitted with EPDM seals and have a temperature rating of -20°C up to 120°C. The pressure rating of these fittings are 16 Bar or 232 PSI. They are also available with Gas Rated NBR/HNBR seals and our Inox Extreme FKM seals. We also stock 90 degree bends with a male BSP thread on one end that is the same size as the press end. So a 54mm bend will have a 50NB Male BSP thread on one end.
The other option available in our RapidPress range is the Male Female 90 degree elbow which is a sharp 90 rather than a bend. This elbow has a Male BSP thread on one end that is the same size as the press end. So a 54mm bend will have a 50NB Male BSP thread on one end. These can be used in situations where the corner is too tight for a standard bend.
Related Products
No result found for " Press-Fit Bends & Elbows , Press-Fit Bends & Elbows - Extreme, Press-Fit Bends & Elbows - Gas ".
Learn about Stainless Steel and discover more about how we can help you with supply in your engineering business.
Watch the latest videos from The Metal Company to learn all about how our products and services can help you. We Make buying stainless steel easy.
More Videos About RapidPress
February 20, 2024
January 30, 2024
December 19, 2023
September 26, 2023
August 29, 2023
June 14, 2023
June 14, 2023
RapidPress Bends vs Elbows
In our RapidPress bends range we have both Female-Female bends and Male-Female bends available in both 90 degree and 45 degree configurations.
We stock these in sizes from 15 – 108mm. Our standard bends are fitted with EPDM seals and have a temperature rating of -20°C up to 120°C. The pressure rating of these fittings are 16 Bar or 232 PSI. They are also available with Gas Rated NBR/HNBR seals and our Inox Extreme FKM seals. We also stock 90 degree bends with a male BSP thread on one end that is the same size as the press end. So a 54mm bend will have a 50NB Male BSP thread on one end.
The other option available in our RapidPress range is the Male Female 90 degree elbow which is a sharp 90 rather than a bend. This elbow has a Male BSP thread on one end that is the same size as the press end. So a 54mm bend will have a 50NB Male BSP thread on one end. These can be used in situations where the corner is too tight for a standard bend.
Related Products
No result found for " Press-Fit Bends & Elbows , Press-Fit Bends & Elbows - Extreme, Press-Fit Bends & Elbows - Gas ".
More Videos About RapidPress
February 20, 2024
January 30, 2024
December 19, 2023
September 26, 2023
August 29, 2023
June 14, 2023
June 14, 2023
More RapidPress Rundown Videos
RapidPress Deburrer Tool | RapidPress Rundown
The RapidPress Deburrer Tool is designed for use on RapidPress tube from 15-54mm but can also be used on other stainless tubes or pipes. Watch Patrick discuss what the deburrer tool is and how to use it.
RapidPress Rotary Tube Cutter | RapidPress Rundown
The RapidPress rotary tube cutter is our preferred method of cutting tubes from 15mm – 76mm as it leaves a burr free edge on the external of the tube. Watch Patrick discuss how to use this tool.
RapidPress Expansion Bellows | RapidPress Rundown
When pipelines are heated or cooled it can cause them to expand or contract in length. If this is not compensated for it can put extreme pressure on welds or pressed joints resulting in failure. Watch Patrick discuss our RapidPress Expansion Bellows.
RapidPress BSP Unions | RapidPress Rundown
In our RapidPress BSP Union range we have both the male and female BSP union’s available. Our RapidPress BSP Unions consist of three parts, the BSP end connection, a flat faced seal and the press end connection. Watch Patrick discuss.
You Ask, We Answer
Do you have questions regarding stainless steel, our products or our service? We would love to hear your suggestions for videos we could make.
