THE METAL COMPANY IS NOW CLOSED FOR THE HOLIDAY BREAK. We will be back open at 8am Monday 6th of January. Happy Holidays!
Expansion & Vibration
Galvanised Table D/E Expansion Bellow
Galvanised Table D/E Expansion Bellow
Features
EPDM Expansion Bellow
Temperature rating from -15°C to 115°C
Pressure Rating up to 16 Bar (232 psi)
Galvanised Table E Flanges
Related Products
FlexiFlow 'U' Loop w/ Imperial Tube Ends
FlexiFlow 'U' Loop w/ Imperial Tube Ends
Features
Butt Weld Ends (Imperial Tube)
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow Hose with Table E Flanges
FlexiFlow Hose with Table E Flanges
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: Table E (*Non Standard* AS2129) Flange
Connection 2: Table E (*Non Standard* AS2129) Flange with Neck Ring (Floating Flange)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with RapidPress Couplers
FlexiFlow Hose with RapidPress Couplers
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: RapidPress Couplers
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with Imperial Tube Ends
FlexiFlow Hose with Imperial Tube Ends
Features
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: Imperial Tube Butt Weld Ends
Temperature Rating: -100˚C to 550˚C
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar)
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ Imperial Tube Ends
FlexiFlow 'V' Loop w/ Imperial Tube Ends
Features
Butt Weld Ends (Imperial Tube)
Measurement 'D' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow Hose with RJT Male/Female
FlexiFlow Hose with RJT Male/Female
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: RJT Male Part
Connection 2: RJT Weld Liner & Hex Nut
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ BSP Floating Nuts
FlexiFlow 'V' Loop w/ BSP Floating Nuts
Features
BSP Floating Nut End Connections
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow Hose with PN10-40 Flanges
FlexiFlow Hose with PN10-40 Flanges
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: PN10/16/40 (EN1092-1) Flange
Connection 2: PN10/16/40 (EN1092-1) Flange with Neck Ring (Floating Flange)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with Schedule 10S Pipe Ends
FlexiFlow Hose with Schedule 10S Pipe Ends
Features
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: Schedule 10S Pipe Butt Weld Ends
Temperature Rating: -100˚C to 550˚C
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar)
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ BSP Floating Nuts
FlexiFlow 'U' Loop w/ BSP Floating Nuts
Features
BSP Floating Nut End Connections
Measurement 'F' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow Hose with RapidPress Extreme Couplers
FlexiFlow Hose with RapidPress Extreme Couplers
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: RapidPress Extreme Couplers (FKM)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with BSP/RJT Female
FlexiFlow Hose with BSP/RJT Female
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: BSP Nipple
Connection 2: RJT Weld Liner & Hex Nut
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with Tri Clover Ferrules
FlexiFlow Hose with Tri Clover Ferrules
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: Tri Clover Ferrules
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ RJT Connections
FlexiFlow 'U' Loop w/ RJT Connections
Features
RJT Male Part & Weld Liner/Hex Nut End Connections
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow Hose with ANSI150 Flanges
FlexiFlow Hose with ANSI150 Flanges
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: ANSI150 (ASME B16.5) Flange
Connection 2: ANSI150 (ASME B16.5) Flange with Neck Ring (Floating Flange)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with BSP Male/Female Connections
FlexiFlow Hose with BSP Male/Female Connections
Features
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: BSP Nipple
Connection 2: BSP Running Nut
Temperature Rating: -100˚C to 550˚C
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
***Please note that some stock is made up of FlexiFlow Hoses with BSP Running Nuts on both ends with a FlexiFlow BSP Conical Hex Nipple pre-installed on one end until new stock arrives***
Click 'View Dimensions' for the following information:
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar)
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ RJT Connections
FlexiFlow 'V' Loop w/ RJT Connections
Features
RJT Male Part & Weld Liner/Hex Nut End Connections
Measurement 'D' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow Hose with BSP/Tri Clover Ferrule
FlexiFlow Hose with BSP/Tri Clover Ferrule
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: BSP Nipple
Connection 2: Tri Clover Ferrule
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
A = Total Length
B = Hose ID
C = Braid OD
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ Tri Clover Ferrules
FlexiFlow 'V' Loop w/ Tri Clover Ferrules
Features
Tri Clover Ferrule End Connections
Measurement 'D' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ Tri Clover Ferrules
FlexiFlow 'U' Loop w/ Tri Clover Ferrules
Features
Tri Clover Ferrule End Connections
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ RapidPress Couplers
FlexiFlow 'V' Loop w/ RapidPress Couplers
Features
RapidPress Coupler End Connections (EPDM Seals)
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow BSP Conical Hex Nipple
FlexiFlow BSP Conical Hex Nipple
Features
Conical faced internal suitable for use with FlexiFlow Hoses with BSP Running Nuts
BSP Threaded Ends (ISO 7-1, ISO 228-1)
Working Pressure: 10 bar (150 psi)
Working Temperature: 250°C @ 10 bar
*Please note: Dimension 'A' is BSPT and Dimension 'B' is BSPP*
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ RapidPress Couplers
FlexiFlow 'U' Loop w/ RapidPress Couplers
Features
RapidPress Coupler End Connections (EPDM Seals)
Measurement 'F' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ RapidPress Extreme Couplers
FlexiFlow 'U' Loop w/ RapidPress Extreme Couplers
Features
RapidPress Extreme Coupler End Connections (FKM Seals)
Measurement 'F' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ RapidPress Extreme Couplers
FlexiFlow 'V' Loop w/ RapidPress Extreme Couplers
Features
RapidPress Extreme Coupler End Connections (FKM Seals)
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ Schedule 10S Pipe Ends
FlexiFlow 'U' Loop w/ Schedule 10S Pipe Ends
Features
Butt Weld Ends (Schedule 10S Pipe)
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ Schedule 10S Pipe Ends
FlexiFlow 'V' Loop w/ Schedule 10S Pipe Ends
Features
Butt Weld Ends (Schedule 10S Pipe)
Measurement 'D' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ Loose Table E Flanges
FlexiFlow 'U' Loop w/ Loose Table E Flanges
Features
Table E Loose Flange End Connections (AS2129 Bolt Pattern Only)
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ Loose Table E Flanges
FlexiFlow 'V' Loop w/ Loose Table E Flanges
Features
Table E Loose Flange End Connections (AS2129 Bolt Pattern Only)
Measurement 'D' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ Loose PN10-16 Flanges
FlexiFlow 'U' Loop w/ Loose PN10-16 Flanges
Features
PN10-16 Loose Flange End Connections (EN1092-1 Bolt Pattern Only)
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ Loose PN10-16 Flanges
FlexiFlow 'V' Loop w/ Loose PN10-16 Flanges
Features
PN10-16 Loose Flange End Connections (EN1092-1 Bolt Pattern Only)
Measurement 'D' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'U' Loop w/ Loose ANSI 150 Flanges
FlexiFlow 'U' Loop w/ Loose ANSI 150 Flanges
Features
ANSI 150 Loose Flange End Connections (ASME B16.5 Bolt Pattern Only)
Measurement 'E' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
FlexiFlow 'V' Loop w/ Loose ANSI 150 Flanges
FlexiFlow 'V' Loop w/ Loose ANSI 150 Flanges
Features
ANSI 150 Loose Flange End Connections (ASME B16.5 Bolt Pattern Only)
Measurement 'D' = Deflection (all directions, per side)
Lifting/Cable Lug can be added on request
Please allow 2-3 days lead-time for fabrication
VIEW DIMENSIONS
RapidPress Expansion Compensator
RapidPress Expansion Compensator
Features
EPDM Seals
Measurement 'D' = Maximum amount of expansion length
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
Refer to page 35 in our RapidPress Technical Guide for our Expansion Compensation Table
RapidPress Extreme options available
VIEW DIMENSIONS
