Expansion & Vibration
RapidPress Expansion Compensator
RapidPress Expansion Compensator
Features
EPDM Seals
Measurement 'D' = Maximum amount of expansion length
Temperature rating: -20°C, 120°C
Maximum operating pressure: 16 Bar (232psi)
Refer to page 35 in our RapidPress Technical Guide for our Expansion Compensation Table
RapidPress Extreme options available
Related Products
FlexiFlow Hose with Table E Flanges
FlexiFlow Hose with Table E Flanges
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: Table E (*Non Standard* AS2129) Flange
Connection 2: Table E (*Non Standard* AS2129) Flange with Neck Ring (Floating Flange)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with RapidPress Couplers
FlexiFlow Hose with RapidPress Couplers
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: RapidPress Couplers
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
E = Static/Flexing Minimum Bend Radius (mm)
F = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with Imperial Tube Ends
FlexiFlow Hose with Imperial Tube Ends
Features
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: Imperial Tube Butt Weld Ends
Temperature Rating: -100˚C to 550˚C
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar)
VIEW DIMENSIONS
FlexiFlow Hose with RJT Male/Female
FlexiFlow Hose with RJT Male/Female
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: RJT Male Part
Connection 2: RJT Weld Liner & Hex Nut
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with PN10-40 Flanges
FlexiFlow Hose with PN10-40 Flanges
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: PN10/16/40 (EN1092-1) Flange
Connection 2: PN10/16/40 (EN1092-1) Flange with Neck Ring (Floating Flange)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with Schedule 10S Pipe Ends
FlexiFlow Hose with Schedule 10S Pipe Ends
Features
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: Schedule 10S Pipe Butt Weld Ends
Temperature Rating: -100˚C to 550˚C
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar)
VIEW DIMENSIONS
FlexiFlow Hose with RapidPress Extreme Couplers
FlexiFlow Hose with RapidPress Extreme Couplers
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: RapidPress Extreme Couplers (FKM)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
E = Static/Flexing Minimum Bend Radius (mm)
F = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with BSP/RJT Female
FlexiFlow Hose with BSP/RJT Female
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: BSP Nipple
Connection 2: RJT Weld Liner & Hex Nut
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with Tri Clover Ferrules
FlexiFlow Hose with Tri Clover Ferrules
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: Tri Clover Ferrules
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with ANSI150 Flanges
FlexiFlow Hose with ANSI150 Flanges
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: ANSI150 (ASME B16.5) Flange
Connection 2: ANSI150 (ASME B16.5) Flange with Neck Ring (Floating Flange)
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow Hose with BSP Male/Female Connections
FlexiFlow Hose with BSP Male/Female Connections
Features
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: BSP Nipple
Connection 2: BSP Running Nut
Temperature Rating: -100˚C to 550˚C
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
***Please note that some stock is made up of FlexiFlow Hoses with BSP Running Nuts on both ends with a FlexiFlow BSP Conical Hex Nipple pre-installed on one end until new stock arrives***
Click 'View Dimensions' for the following information:
D = Static/Flexing Minimum Bend Radius (mm)
E = Working/Test Pressure (bar)
VIEW DIMENSIONS
FlexiFlow Hose with BSP/Tri Clover Ferrule
FlexiFlow Hose with BSP/Tri Clover Ferrule
Features
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connection 1: BSP Nipple
Connection 2: Tri Clover Ferrule
Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
F = Static/Flexing Minimum Bend Radius (mm)
G = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
VIEW DIMENSIONS
FlexiFlow BSP Conical Hex Nipple
FlexiFlow BSP Conical Hex Nipple
Features
Conical faced internal suitable for use with FlexiFlow Hoses with BSP Running Nuts
BSP Threaded Ends (ISO 7-1, ISO 228-1)
Working Pressure: 10 bar (150 psi)
Working Temperature: 250°C @ 10 bar
*Please note: Dimension 'A' is BSPT and Dimension 'B' is BSPP*
VIEW DIMENSIONS
